FreeCAD Forum

thomas-neemann wrote: ↑Sun Aug 15, 2021 8:32 pm

measurements in freecad to find out how many meters earlier you can be seen.


https://www.youtube.com/watch?v=fC380WF0z5Y

jhaand wrote: ↑Tue Nov 16, 2021 9:36 am Here is the holder with a bayonet attachment interface.
See the discussion about the design here:
https://forum.freecadweb.org/viewtopic. ... 5&p=546544

bayonet_curved.png
Here's the design printed on my Prusa Mini+ using Colorfabb economy PETG (Dark Grey) and 30% infill.

It feels really solid.
Bayonet_holder_PETG.jpg

Here's is a picture of the mounting bracket with the anemometer.

Very cool, thank you!

Hello people, I also made a small side project using FreeCAD and I thing that came out nice so, here it is. Is a hanger for my bike, made from steel and wood. The wood was a scrap piece from the construction of my coffee table. The steel part is cut on a laser cutter.

(I also made a FEM analysis for my overkill 5mm steel plate to hang a ~10kg bike ) The master sketch with measurements Close up of the hanger And here in action
Here is the FreeCAD file if you want to make it or change it or whatever under CERN OHL v1.2

Vernier scale bike clock...

papamat wrote: ↑Wed Dec 08, 2021 9:58 pm Hello people, I also made a small side project using FreeCAD and I thing that came out nice so, here it is. Is a hanger for my bike, made from steel and wood. The wood was a scrap piece from the construction of my coffee table. The steel part is cut on a laser cutter.

I really like this tbh, it's simple but elegant, I could well see myself implementing something similar in the future.

j-dowsett wrote: ↑Thu Jan 13, 2022 3:51 pm I really like this tbh, it's simple but elegant

+1
Thanks at @papamat for sharing!

A simple PV pannel for my IoT sensor.
The base can be fitted to different size of PV panels. Just changes the size in Spreadsheet.
The model is at gitHUB https://github.com/glompos21/FreeCADMod ... in/PV_Base

Do you plan to motorize it or is the hinge a "set up once" thing?

here is the opposite case. a real construction recreated in freecad. (I didn't have freecad back then).

it is a sealless hydrogen low pressure accumulator and compressor control. without seals is important because they can leak and that is very dangerous with hydrogen

https://www.youtube.com/watch?v=ovBceeq9DYY





OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 0.20.27662 (Git) AppImage
Build type: Release
Branch: (HEAD detached at 7a44a5c)
Hash: 7a44a5ca547fa162593b53cc3e017039d99bf4ef
Python 3.9.10, Qt 5.12.9, Coin 4.0.0, OCC 7.5.3
Locale: German/Germany (de_DE)
Installed mods:
* InventorLoader 1.3.0