From FreeCAD To The Real World

Show off your FreeCAD projects here!
User avatar
thomas-neemann
Veteran
Posts: 4597
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE

Re: From FreeCAD To The Real World

Post by thomas-neemann »

thomas-neemann wrote: Sun Aug 15, 2021 8:32 pm
measurements in freecad to find out how many meters earlier you can be seen.


https://www.youtube.com/watch?v=fC380WF0z5Y


phpBB [video]
falls ein video-link von mir schwarz sein sollte, hier der kanal: https://www.youtube.com/channel/UCVcztV ... ry=freecad
vehiculo 2.0 : https://forum.freecadweb.org/viewtopic. ... 10#p556304
User avatar
jhaand
Posts: 16
Joined: Thu Apr 01, 2021 12:22 pm
Location: Venlo, The Netherlands
Contact:

Re: From FreeCAD To The Real World

Post by jhaand »

jhaand wrote: Tue Nov 16, 2021 9:36 am Here is the holder with a bayonet attachment interface.
See the discussion about the design here:
https://forum.freecadweb.org/viewtopic. ... 5&p=546544

bayonet_curved.png
Here's the design printed on my Prusa Mini+ using Colorfabb economy PETG (Dark Grey) and 30% infill.

It feels really solid.
Bayonet_holder_PETG.jpg
Here's is a picture of the mounting bracket with the anemometer.
Anemometer bracket on pole.
Anemometer bracket on pole.
IMG_20211117_120021.jpg (755.94 KiB) Viewed 1614 times
User avatar
M4x
Posts: 966
Joined: Sat Mar 11, 2017 9:23 am
Location: Germany

Re: From FreeCAD To The Real World

Post by M4x »

Very cool, thank you!
papamat
Posts: 5
Joined: Mon Jan 18, 2016 5:43 pm

Re: From FreeCAD To The Real World

Post by papamat »

Hello people, I also made a small side project using FreeCAD and I thing that came out nice so, here it is. Is a hanger for my bike, made from steel and wood. The wood was a scrap piece from the construction of my coffee table. The steel part is cut on a laser cutter.

(I also made a FEM analysis for my overkill 5mm steel plate to hang a ~10kg bike :lol: )
Screenshot from 2021-12-08 23-20-09.png
Screenshot from 2021-12-08 23-20-09.png (87.07 KiB) Viewed 1122 times
The master sketch with measurements
Screenshot from 2021-12-08 23-34-43.png
Screenshot from 2021-12-08 23-34-43.png (207.53 KiB) Viewed 1122 times
Close up of the hanger
PXL_20201229_104756998.jpg
PXL_20201229_104756998.jpg (90.22 KiB) Viewed 1122 times
And here in action
PXL_20210309_125840013.jpg
PXL_20210309_125840013.jpg (98.32 KiB) Viewed 1122 times

Here is the FreeCAD file if you want to make it or change it or whatever under CERN OHL v1.2
Attachments
bikeHanger2.FCStd
(193.53 KiB) Downloaded 25 times
j-dowsett
Posts: 206
Joined: Wed Sep 07, 2011 9:37 am

Re: From FreeCAD To The Real World

Post by j-dowsett »

Vernier scale bike clock...
model.png
model.png (22.66 KiB) Viewed 445 times
front.jpg
front.jpg (254.95 KiB) Viewed 445 times
j-dowsett
Posts: 206
Joined: Wed Sep 07, 2011 9:37 am

Re: From FreeCAD To The Real World

Post by j-dowsett »

papamat wrote: Wed Dec 08, 2021 9:58 pm Hello people, I also made a small side project using FreeCAD and I thing that came out nice so, here it is. Is a hanger for my bike, made from steel and wood. The wood was a scrap piece from the construction of my coffee table. The steel part is cut on a laser cutter.
I really like this tbh, it's simple but elegant, I could well see myself implementing something similar in the future.
User avatar
-alex-
Veteran
Posts: 1171
Joined: Wed Feb 13, 2019 9:42 pm
Location: France

Re: From FreeCAD To The Real World

Post by -alex- »

j-dowsett wrote: Thu Jan 13, 2022 3:51 pm I really like this tbh, it's simple but elegant
+1
Thanks at @papamat for sharing!
Post Reply