Thank you for your help and Freecad

Show off your FreeCAD projects here!
Post Reply
snoutbrowser
Posts: 14
Joined: Mon Jan 04, 2021 11:55 am

Thank you for your help and Freecad

Post by snoutbrowser »

Just to say thank you for the support that I have received for the one or two issues I have encountered with FC from this forum. I feel as if I'm over the initial hump of the learning curve and look forward to the future. I attach a couple of practice pieces.
Attachments
practice_pieces1.jpg
practice_pieces1.jpg (110.02 KiB) Viewed 2374 times
paullee
Posts: 3881
Joined: Wed May 04, 2016 3:58 pm

Re: Thank you for your help and Freecad

Post by paullee »

Looks really cool 8-)

All 3 pieces 3d printed ?
openBrain
Posts: 6793
Joined: Fri Nov 09, 2018 5:38 pm

Re: Thank you for your help and Freecad

Post by openBrain »

paullee wrote: Wed Oct 13, 2021 8:47 am Looks really cool 8-)

All 3 pieces 3d printed ?
I'd bet for 3D rendered. :)
paullee
Posts: 3881
Joined: Wed May 04, 2016 3:58 pm

Re: Thank you for your help and Freecad

Post by paullee »

openBrain wrote: Wed Oct 13, 2021 8:49 am I'd bet for 3D rendered. :)
Really !? Looks quite real with the edge reflection, and probably with the dirt on my screen which I thought is on the surface of the parts :lol:
openBrain
Posts: 6793
Joined: Fri Nov 09, 2018 5:38 pm

Re: Thank you for your help and Freecad

Post by openBrain »

paullee wrote: Wed Oct 13, 2021 8:55 am Really !? Looks quite real with the edge reflection, and probably with the dirt on my screen which I thought is on the surface of the parts :lol:
https://www.blenderguru.com/articles/24 ... er-renders :)
snoutbrowser
Posts: 14
Joined: Mon Jan 04, 2021 11:55 am

Re: Thank you for your help and Freecad

Post by snoutbrowser »

This is a 10 second Blender Cycles render. The edge reflection is achieved by using a 'cheat' Bevel shader.
paullee
Posts: 3881
Joined: Wed May 04, 2016 3:58 pm

Re: Thank you for your help and Freecad

Post by paullee »

I really need to check Blender Cycles later again :D

10 seconds render, can make a 3 min tutorials ?

Thanks.
User avatar
Kunda1
Posts: 10981
Joined: Thu Jan 05, 2017 9:03 pm

Re: Thank you for your help and Freecad

Post by Kunda1 »

snoutbrowser wrote: Wed Oct 13, 2021 8:10 am Just to say thank you for the support that I have received for the one or two issues I have encountered with FC from this forum. I feel as if I'm over the initial hump of the learning curve and look forward to the future. I attach a couple of practice pieces.
Awesome! Could you also attach some screenshots of the models in FreeCAD ? Also please paste your full About info in the OP (with the additional screenshots please!) thanks!
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
#lowhangingfruit | Use the Source, Luke. | How to Help FreeCAD | How to report FC bugs and features
Post Reply