Some of my designs...

[obelisk79]

I recently wanted to try and model a double enveloping worm and wheel set as a challenge. This is what I came up with.

I used linkstage3, but should still be compatible with main builds. Video and file are in the drive link below

https://drive.google.com/folderview?id= ... hclGn52kok

[obelisk79]

Screenshot_2021-08-30_20-54-38.png (281.78 KiB) Viewed 4478 times

[obelisk79]

Here is a custom effector and integrated cooling configuration I made as a mod to a Monoprice Mini Delta 3d printer.

Screenshot_2021-08-30_21-16-21.png (275.69 KiB) Viewed 4478 times

Screenshot_2021-08-30_21-16-39.png (291.08 KiB) Viewed 4478 times

[obelisk79]

A work-in-progress concept for an extremely lightweight (76g weight with the motor) direct drive 3d printer extruder using a cycloidal speed reducer..

Screenshot_2021-08-30_21-02-52.png (372.42 KiB) Viewed 4477 times

[obelisk79]

Carriage, hotend + mount and fan duct design for a fully custom designed CoreXY printer.

Screenshot_2021-08-30_20-56-53.png (311.46 KiB) Viewed 4469 times

[obelisk79]

After one of the recent dumpster fire forum threads about logos I decided to take my own spin on a FC logo concept. Because, why not? Best of all, it was just plain old fun to make...

Screenshot_2021-08-30_20-55-14.png (125.88 KiB) Viewed 4464 times

[PeterPNoster]

Impressive assemblies!