Das brauch ich nicht in Sekunden.thomas-neemann wrote: ↑Fri Sep 18, 2020 6:09 pmich konnte die datei in 2,5 minuten laden, wenn ich freecad unter linux mit höchster priorität laufen lasse. (auf einem 7 jahre alten büro-pc)
wenn ich daraus mit part einen verbund mache und als fcstd abspeichere, läd die datei nach freecad-neustart in 8 sekunden. das halte ich für brauchbar.
lg thomas
glider workbench
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: glider workbench
Re: glider workbench
Ok I don't understand one thing, I don't know if it's a bug or if I just don't get it, but the exported svg looks like it has no panel or ribs, there's almost nothing there. To reproduce:
1. Create new glider
2. Export with "unwrap glider" tool
there are some schematics in the svg but not what I would expect. It's on FreeCad v0.19
1. Create new glider
2. Export with "unwrap glider" tool
there are some schematics in the svg but not what I would expect. It's on FreeCad v0.19
Re: glider workbench
Best to usw dxf-format. Thus should contain all the Panels.bujak wrote: ↑Wed Dec 16, 2020 11:31 pm Ok I don't understand one thing, I don't know if it's a bug or if I just don't get it, but the exported svg looks like it has no panel or ribs, there's almost nothing there. To reproduce:
1. Create new glider
2. Export with "unwrap glider" tool
there are some schematics in the svg but not what I would expect. It's on FreeCad v0.19
Re: glider workbench
thanks, bTW I figured it out, it was no stroke color and 1px thin lines, i had to change the color and increase the line width
Re: glider workbench
OK another thing, when I put a diagonal rib and a single skin rib at the same time, it never outputs any plans. So I guess they don't work together. Or is it a bug?
-
- Posts: 1
- Joined: Wed Feb 03, 2021 9:07 am
Re: glider workbench
Good day Looo
I Love your program i have designed a mini wing that i now want to manufacture .
I am having difficulties' exporting glider to dxf as it only gives me 'jason and openoffice format .
Not sure what to to please advise .
Kind regards
Zenti
I Love your program i have designed a mini wing that i now want to manufacture .
I am having difficulties' exporting glider to dxf as it only gives me 'jason and openoffice format .
Not sure what to to please advise .
Kind regards
Zenti
Re: glider workbench
I'm baffled by one thing (I'm on the stable branch): when I make the lowest gallery lines a bit longer (the ones that connect to the riser), the top of the gallery gets some "punk" artifacts. Looks like the top gallery lines are "reversed". Is it a bug or some underlying design limitation? I'm not sure what I'm looking at. Am I misunderstanding something about how to change the lines lenght?
- Attachments
-
- Screenshot 2021-02-11 at 09.20.20.png (131.77 KiB) Viewed 6369 times
-
- Screenshot 2021-02-11 at 09.19.34.png (54.62 KiB) Viewed 6369 times
Re: glider workbench
you need to reset the location of the bottom-attachment point. Otherwise the total length of the given lines is too long. see this image:
Re: glider workbench
thanks! it worked