call for screenshots - By Yorik

Show off your FreeCAD projects here!
User avatar
yorik
Site Admin
Posts: 12388
Joined: Tue Feb 17, 2009 9:16 pm
Location: Brussels, Belgium
Contact:

Re: call for screenshots - By Yorik

Post by yorik »

OficineRobotica wrote: Wed Nov 24, 2021 4:44 pm It would be nice to habe it remember the dimension. Could you please do something about that?
Ok that should be easy to do, adding to my TODO list.

Not sure in linkstage3 modified something about Qt's WebEngine?
User avatar
ifohancroft
Posts: 99
Joined: Fri May 31, 2019 11:25 pm
Location: Sofia, Bulgaria
Contact:

Re: call for screenshots - By Yorik

Post by ifohancroft »

jimmihenry wrote: Wed Nov 24, 2021 1:28 am 200 steps per revolution outstanding repeatability. Used in applications like scanners, floppy drives, disk drives, CNC machinery and
most downloaded model on my GrabCAD. Yes it is a Stepper motor, precisely NEMA17 x 40mm about 45cm holding torque @ approximately
2 Amps. Here is the link to this model and some other NEMA17's.

Nema17 x 33mm: https://grabcad.com/library/nema17-x-33-1
Nema17 x 40mm: https://grabcad.com/library/nema17-x-40-1
Nema17 x 48mm: https://grabcad.com/library/nema17-x-48-1
Nema17 x 60mm: https://grabcad.com/library/nema17-x-60-1

Cheers.
Any chance you can share the source (FreeCAD) file for it? I'd love to see how you've made it. Specially the animation and the cables.
I like to make, break & modify stuff via a soldering iron, code or both. https://ifohancroft.com
User avatar
jimmihenry
Posts: 49
Joined: Sat Jan 11, 2020 3:36 pm

Re: call for screenshots - By Yorik

Post by jimmihenry »

ifohancroft wrote: Thu Nov 25, 2021 10:51 pm Any chance you can share the source (FreeCAD) file for it? I'd love to see how you've made it. Specially the animation and the cables.
The animation is made with Gimp, the images for the animation are made with a macro by Mario52 it is called SCREEN WIKI.
Here is the link for more information: https://wiki.freecadweb.org/Macro_Screen_Wiki. You can also use FreeCADs positioning
and the feature Save picture... (Tools -> Save picture...) to create the images, this is how i made the F22 animated GIF. The wiring
is made using several sketches, all with a simple circle. The sketches are raised to different heights and moved circular around the
Z- axis. To get the solid i used the Additive loft feature from the Part design workbench. You could do the cable using the Additive helix
feature. Make a sketch containing a circle and you are almost done. Everything here is the most simple procedure. I have added the
FreeCAD *.FCStd files to my GrabCAD page: https://grabcad.com/library/nema17-x-40-1
Attachments
Helix & Loft.png
Helix & Loft.png (151.17 KiB) Viewed 76 times
Post Reply