LineSegments to one line in sketch

A forum dedicated to the Draft, Arch and BIM workbenches development.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
NEP_11
Posts: 1
Joined: Thu Sep 29, 2022 12:47 pm

LineSegments to one line in sketch

Post by NEP_11 »

Hello,

I have a profile of a part in sketch, it is formed by several lines (lineSegments) and I am trying in every possible way to make it a single continuous line. Not visually, but in the "Elements" box, I am trying to make it a single line, and then revolutionize the profile to be a single surface instead of several faces.
Attached my code of the lines that I need to be a single line.
Could you please tell me if this can be done?
The constraints do not work for me in this case because they only join lines visually.

Thanks in advance
Attachments
prueba.FCStd
(6.85 KiB) Downloaded 24 times
chrisb
Veteran
Posts: 53920
Joined: Tue Mar 17, 2015 9:14 am

Re: LineSegments to one line in sketch

Post by chrisb »

You can use a B-spline made in Curves WB, but may I ask why you want this?
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Post Reply