[ SOLVED ]FC 0.21 Problem – Rotate Copy – Strange Result

A forum dedicated to the Draft, Arch and BIM workbenches development.
Post Reply
User avatar
Palmtree
Posts: 62
Joined: Wed Apr 08, 2020 5:06 am

[ SOLVED ]FC 0.21 Problem – Rotate Copy – Strange Result

Post by Palmtree »

The attached file is a block of land boundary (4 Points connected by a wire). All contained in the group (Site Boundary).

In BIM WB => Highlight the group (Site Boundary -to align site to FC North-refer to Image1) => Modify => Rotate => Copy ===> Strange Result (unwanted result, image 2).

Deleting the 2xfiles (system.cfg and user.cfg) does not solve the problem

Am I missing something? :? :? :? :? :? :? Please comment.

**********************************
**********************************

Code: Select all

OS: Windows 10 (10.0)
Word size of FreeCAD: 64-bit
Version: 0.21.29485 (Git)
Build type: Release
Branch: master
Hash: a236ca843fdd6674afb6d7ed1454fbd3b547f5ea
Python 3.8.13, Qt 5.12.9, Coin 4.0.0, Vtk 9.1.0, OCC 7.5.3
Locale: English/Australia (en_AU)
Installed mods: 
  * Behave-Dark-Colors 0.0.1
  * BIM 2021.12.0
  * dodo
  * Help 1.0.3
  * PieMenu
  * ProDarkThemePreferencePack 1.0.0
  * SketchArch
**********************************
**********************************
Attachments
Image1.jpg
Image1.jpg (237.96 KiB) Viewed 435 times
Image2.jpg
Image2.jpg (316.28 KiB) Viewed 435 times
Sketch-Site-R2.FCStd
(11.19 KiB) Downloaded 10 times
Last edited by Palmtree on Thu Aug 04, 2022 5:19 am, edited 1 time in total.
User avatar
Palmtree
Posts: 62
Joined: Wed Apr 08, 2020 5:06 am

Re: FC 0.21 Problem – Rotate Copy – Strange Result

Post by Palmtree »

Thanks Roy
Post Reply