The Frenet "Align Mode" should ignore the "Force Vertical" and the "Vertical Vector" property, but in a test with a non-planar wire it does not.
Test:
- Open the attached file.
- PathArray001 and PathArray002 are identical except for the "Force Vertical" and the "Vertical Vector" property.
- Side note: the alignment of the elements in PathArray001 seems strange to me...
- Select PathArray001 and PathArray002 and change the "Align Mode" from Original to Frenet.
- Recompute.
- Result: the alignment of elements in PathArray001 does not change, the alignment of elements in PathArray002 does, but there are clear differences between the two arrays.
- The conclusion therefore must be that "Force Vertical" and the "Vertical Vector" are not ignored if "Align Mode" is Frenet.
Code: Select all
OS: Windows 8.1 Version 6.3 (Build 9600)
Word size of FreeCAD: 64-bit
Version: 0.20.24986 (Git)
Build type: Release
Branch: master
Hash: ff6845e2f31988cc714027980e0100bb5521843e
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: Dutch/Netherlands (nl_NL)