Arch Fence
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: Arch Fence
@furti is not active it seems
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Re: Arch Fence
The Arch_Fence command does not create the post and section from scratch. The user has to create those objects first.
Re: Arch Fence
that is the problem, I don't know what are the initial steps to create the objects that will be part of the fence
Re: Arch Fence
Maybe start with some Tutorials then?
Re: Arch Fence
I have searched everywhere, and there is no tutorial to make a fence, it is incredible.
could you help me with the steps?
maybe a little demo with just clicks???
could you help me with the steps?
maybe a little demo with just clicks???
Re: Arch Fence
@Kunda1 I'm reading the forum for a while now but unfortunately my time for amswering topics is very limited.
@jpolonia I think you struggle with the first step describes in the Arch Fence page.
The easiest way to create a post and section is to use a Part Box.
1. Switch to part workbench
2. Create part box and set length and width to 100mm and height to 1000mm. This is your post
3. Create another box. Set height and width to 100mm and length to 1000mm. move it up in z direction by 500mm. This is your section.
4. Continue with steps 2 to 5 mentioned on the Arch Fence wiki page.
Now you should have a fence.
@jpolonia I think you struggle with the first step describes in the Arch Fence page.
The easiest way to create a post and section is to use a Part Box.
1. Switch to part workbench
2. Create part box and set length and width to 100mm and height to 1000mm. This is your post
3. Create another box. Set height and width to 100mm and length to 1000mm. move it up in z direction by 500mm. This is your section.
4. Continue with steps 2 to 5 mentioned on the Arch Fence wiki page.
Now you should have a fence.
Re: Arch Fence
@furti great to see you! Didn't know you were lurking
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Re: Arch Fence
Furti is also the author of Arch Texture WB !
Re: Arch Fence
thank you very much...furti wrote: ↑Wed Nov 30, 2022 6:51 am @Kunda1 I'm reading the forum for a while now but unfortunately my time for amswering topics is very limited.
@jpolonia I think you struggle with the first step describes in the Arch Fence page.
The easiest way to create a post and section is to use a Part Box.
1. Switch to part workbench
2. Create part box and set length and width to 100mm and height to 1000mm. This is your post
3. Create another box. Set height and width to 100mm and length to 1000mm. move it up in z direction by 500mm. This is your section.
4. Continue with steps 2 to 5 mentioned on the Arch Fence wiki page.
Now you should have a fence.