Petert wrote: ↑Thu Nov 18, 2021 8:34 am
kastSterre.FCStd
Where did You disappear Petert? Are You fine?
I use Ubuntu 20.4 LTS and there is FreeCAD version 0.18.4 as default, so the file wasn't readable for me before, many unnamed object, one big mess. Yesterday when I was testing new test cases for Pads I opened Your file again but this time with FreeCAD 0.19.3 AppImage and I saw that everything looks fine, so looks like there is no backward compatibility at FreeCAD.
The TechDraw page for You project is looking good, almost all was listed, except two objects: Pad005 and Pad020, as I remember correctly.
The Pad020 is dowel made from Sketch, but dowels are not supported. More easy would be support dowels made from cylinders not from Sketch (there is no control of Sketch shape). However, I have mixed feelings about supporting furniture accessories. There are too many of them and they are too complicated to calculate.
The Pad005 is like two boards in one. I can't open Sketch005, and even anyone from Your project, because FreeCAD 0.19.3 AppImage not allow for that, it reports incorrect Sketch for each one. However, all other Pads works fine with the macro. At the Pad005 did You create mirror transformation directly on Sketch and then Pad two Sketches as one Pad?
For Pad005 and Pad020 there is no such thing like
.Profile[0].Shape.OrderedEdges there are
Edges and
Constraints but this is not good place to get dimensions, they are not sorted, random values, even for rectangular shapes at Sketch.
If You want them also listed, only You can do is to add them manually to
toCut spreadsheet and add "keep updated" option to TechDraw report
toPrint. Also You can change the Sketch005 to get correct Pad005 structure. Good Luck and don't give up so quickly !