[Assembly3] Element from Datum feature are not in the right place

Discussion about the development of the Assembly workbench.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
User avatar
nemesis
Posts: 372
Joined: Tue Mar 25, 2014 11:24 pm
Location: France, Lyon

[Assembly3] Element from Datum feature are not in the right place

Post by nemesis »

Hello all,
I'm running into an issue using datum feature to create element.
the element created is not at the same position/orientation than the datum feature.
Am I missing something or is it a bug ?

Image

Code: Select all

OS: KDE Flatpak runtime (KDE/lightdm-xsession)
Word size of FreeCAD: 64-bit
Version: 0.20.1.29410 (Git)
Build type: Release
Branch: (HEAD detached at 0.20.1)
Hash: f5d13554ecc7a456fb6e970568ae5c74ba727563
Python 3.9.9, Qt 5.15.5, Coin 4.0.0, Vtk 8.2.0, OCC 7.6.2
Locale: French/France (fr_FR)
Installed mods: 
  * Behave-Dark-Colors 0.1.1
  * ExtremeProDark 2.0.0
  * ProDarkThemePreferencePack 1.0.0
  * Assembly3 0.11.3
Attachments
ProofOfConcept.FCStd
Datum plane issue on element
(124.42 KiB) Downloaded 39 times
User avatar
nemesis
Posts: 372
Joined: Tue Mar 25, 2014 11:24 pm
Location: France, Lyon

Re: [Assembly3] Element from Datum feature are not in the right place

Post by nemesis »

ok,
so after digging deeper and deeer, it turns out that this is bug.
present in 0.20.1 branhc, but not in realthunder branch

https://github.com/realthunder/FreeCAD_ ... ssues/1228


in the image below from :
Version: 2022.709.26244 +5001 (Git) AppImage
Build type: Release
Branch: LinkDaily
Hash: 096210d21183e9dfdc3b25777760bfb6c00a210b
Screenshot_20221004_205951.png
Screenshot_20221004_205951.png (139.83 KiB) Viewed 610 times
we can see the plane and element are at the same place
Post Reply