understand - thank youthomas-neemann wrote: ↑Sun May 01, 2022 6:43 am this is how i saved it because the whole model is over 1mb
I didn't realise that .step increase the size of the model so much?
original inner_race_(bambuko).FCStd is only 803kb ?
understand - thank youthomas-neemann wrote: ↑Sun May 01, 2022 6:43 am this is how i saved it because the whole model is over 1mb
I am not familiar with the checks. if that's what's meant, everything seems to be in order. it's just a shell. it was created with freecad from a freecad file. that should actually be error-free for freecad.
no, they are not colliding
Yes, that's right, I overfed it. I noticed a problem with step and iges export
... opened it, selected in the tree the object with the great name Unnamed1001, invoked CheckGeometry and get this: which shows approximately 10% of the errors.thomas-neemann wrote: ↑Sun May 01, 2022 6:35 am i created a new start file with the geometry of bambuko
start-bambuko-step.FCStd
Code: Select all
OS: macOS 10.16
Word size of FreeCAD: 64-bit
Version: 0.20.28751 (Git)
Build type: Release
Python 3.9.12, Qt 5.12.9, Coin 4.0.0, OCC 7.5.3
Locale: C/Default (C)
Installed mods:
* FC_SU
* DynamicData 2.46.0
* FeedsAndSpeeds 0.4.0
* fcgear
* Manipulator 1.4.3
* fasteners
* sheetmetal
* ExplodedAssembly
* Curves 0.3.0
* Assembly4 0.11.12
Code: Select all
OS: elementary OS 6.1 JAlnir (Pantheon/pantheon)
Word size of FreeCAD: 64-bit
Version: 0.20.28765 (Git) AppImage
Build type: Release
Branch: (HEAD detached at 795f86c)
Hash: 795f86c18c22260cfc3627bdd5b71504b9dca4ef
Python 3.9.12, Qt 5.12.9, Coin 4.0.0, OCC 7.5.3
Locale: English/United Kingdom (en_GB)
Installed mods:
* DynamicData 2.46.0
* ToolViewReverse_ToolBar
* sheetmetal 0.2.49
* Manipulator 1.4.3
* Assembly3 0.11.3
* fasteners 0.3.40
* ThreadProfile 1.81.0
how is it on your ubuntu machine?
There is currently no current FreeCAD version available on that computer.