Ask for help...About Assembly 4 errors...

[xsuper9988]

There are many errors when I open the old ASM4 project file

My FREECAD version 0.2
My Assembly 4 Version 0.11.4

[Zolko]

There are many errors when I open the old ASM4 project file

These are not Asm4 errors, and this is not an Asm4 assembly : the parts (bodies and solids) are directly inside the assembly container, not linked. The arrays as and mirrors are not from the Asm4 workbench, but probably from Draft or Part WB.

[xsuper9988]

These are not Asm4 errors, and this is not an Asm4 assembly : the parts (bodies and solids) are directly inside the assembly container, not linked. The arrays as and mirrors are not from the Asm4 workbench, but probably from Draft or Part WB.

Very sorry
I thought it was caused by ASM4
This is one of my SUB-ASM4
After I delete ASM4
Only the body and the solid are still wrong
But from the error message I can’t tell where the error came from
Thank you very much for your reply

[xsuper9988]

These are not Asm4 errors, and this is not an Asm4 assembly : the parts (bodies and solids) are directly inside the assembly container, not linked. The arrays as and mirrors are not from the Asm4 workbench, but probably from Draft or Part WB.

I'm done testing
When i remove all the body and solid
And reopen the file and there is no error
I think it is caused by the difference of FREECAD version

FreeCAD-0.19.2.7b5e18a-WIN-x64-portable1
FreeCAD_0.20.26155_Win-LPv12.5.4_vc17.x-x86-64

so...
I don’t know how to deal with this issue...XD

[xsuper9988]

These are not Asm4 errors, and this is not an Asm4 assembly : the parts (bodies and solids) are directly inside the assembly container, not linked. The arrays as and mirrors are not from the Asm4 workbench, but probably from Draft or Part WB.

I find issue topic link
But their discussion seems inconclusive

https://forum.freecadweb.org/viewtopic. ... 7&start=10