Clip Funktion Arch section Plane

In diesem Forum Fragen und Diskussionen in Deutsch
Forum rules
Foren-Regeln und hilfreiche Informationen

WICHTIG: Bitte zuerst lesen, bevor Sie posten
Audioclaudio
Posts: 74
Joined: Sun May 31, 2020 3:57 pm

Clip Funktion Arch section Plane

Post by Audioclaudio »

Hallo Forum,

Code: Select all

OS: Linux Mint 20.2
Word size of FreeCAD: 64-bit
Version: 0.20.
Build type: Release
Branch: unknown
Hash: bda12907dee4fe3f0e7dec8f7e09e098fc5036e4
Python 3.8.10, Qt 5.12.8, Coin 4.0.0, OCC 7.5.2
Locale: German/Germany (de_DE)
Installed mods: 
  * POV-Ray-Rendering
  * CADExchanger
  * BIM 2021.12.0
  * FreeCAD_SheetMetal-master 0.2.49
  * parts_library
in der BIM Workbench erzeuge ich eine Arch Section Plane. Diese 1000x1000 mm groß und setze Clip auf true. Wenn ich es richtig verstehe sollte die dazugehörige Archview dann auch nur den 1000x1000 mm großen Ausschnitt zeigen und so eine Detailansicht ermöglichen. Im konkreten Fall möchte ich den genauen Wandaufbau in der Ecke des Hauses zeigen. Der Ausschnitt wird aber nicht eingeschränkt. Was gibt es denn da noch zu beachten?
Bildschirmfoto_2022-03-12_12-57-05.png
Bildschirmfoto_2022-03-12_12-57-05.png (28.23 KiB) Viewed 1426 times
Bildschirmfoto_2022-03-12_12-53-34.png
Bildschirmfoto_2022-03-12_12-53-34.png (36.25 KiB) Viewed 1426 times
Bildschirmfoto_2022-03-12_12-52-50.png
Bildschirmfoto_2022-03-12_12-52-50.png (33.57 KiB) Viewed 1426 times
Audioclaudio
Posts: 74
Joined: Sun May 31, 2020 3:57 pm

Re: Clip Funktion Arch section Plane

Post by Audioclaudio »

habe ich gegen Forumsregeln verstoßen oder ist die Frage einfach nur zu blöd?
chrisb
Veteran
Posts: 53919
Joined: Tue Mar 17, 2015 9:14 am

Re: Clip Funktion Arch section Plane

Post by chrisb »

Audioclaudio wrote: Sat Mar 12, 2022 7:55 pm habe ich gegen Forumsregeln verstoßen oder ist die Frage einfach nur zu blöd?
Weder noch würde ich sagen. Leider gibt es hier kaum jemanden der sich richtig gut mit Arch auskennt. Du musst möglicherweise aufs englische Forum ausweichen. DeepL.com ist Dein Freund, wenn Du der englischen Sprache nicht ausreichend mächtig bist.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
User avatar
thomas-neemann
Veteran
Posts: 11800
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Clip Funktion Arch section Plane

Post by thomas-neemann »

wenn es auch im 3d fenster dargestellt werden darf, kann ich dir ein video dazu drehen. inkl. pdf druck.
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
Audioclaudio
Posts: 74
Joined: Sun May 31, 2020 3:57 pm

Re: Clip Funktion Arch section Plane

Post by Audioclaudio »

ja gerne :-)
jeno
Veteran
Posts: 1820
Joined: Sun Jun 29, 2014 10:41 am

Re: Clip Funktion Arch section Plane

Post by jeno »

Audioclaudio wrote: Sat Mar 12, 2022 4:26 pm Hallo Forum,
in der BIM Workbench erzeuge ich eine Arch Section Plane. Diese 1000x1000 mm groß und setze Clip auf true. Wenn ich es richtig verstehe sollte die dazugehörige Archview dann auch nur den 1000x1000 mm großen Ausschnitt zeigen und so eine Detailansicht ermöglichen. Im konkreten Fall möchte ich den genauen Wandaufbau in der Ecke des Hauses zeigen. Der Ausschnitt wird aber nicht eingeschränkt. Was gibt es denn da noch zu beachten?
Hallo,
vornweg: ich habe auch keine Ahnung von Arch im Allgemeinen.
Ich rate mal ins Blaue
archsectionview.png
archsectionview.png (56.11 KiB) Viewed 1176 times
Die unvollständige Ausgabe (1) weist darauf hin, dass wegen eines Kreis oder einer Ellipse etwas bei der Erstellung des projection snip ("Projektionsausschnitt") nicht klappt.
Bauchgefühl: das kreissförmige Element (2) liegt zum Teil innerhalb des clipping und zum Teil ausserhalb. Eventuell ist der Start/Endpunkt des Kreises ausserhalb und die Berechnung geht schief.

Mit freundlichen
Audioclaudio
Posts: 74
Joined: Sun May 31, 2020 3:57 pm

Re: Clip Funktion Arch section Plane

Post by Audioclaudio »

jeno wrote: Sun Mar 13, 2022 9:33 am
Audioclaudio wrote: Sat Mar 12, 2022 4:26 pm Hallo Forum,
in der BIM Workbench erzeuge ich eine Arch Section Plane. Diese 1000x1000 mm groß und setze Clip auf true. Wenn ich es richtig verstehe sollte die dazugehörige Archview dann auch nur den 1000x1000 mm großen Ausschnitt zeigen und so eine Detailansicht ermöglichen. Im konkreten Fall möchte ich den genauen Wandaufbau in der Ecke des Hauses zeigen. Der Ausschnitt wird aber nicht eingeschränkt. Was gibt es denn da noch zu beachten?
Hallo,
vornweg: ich habe auch keine Ahnung von Arch im Allgemeinen.
Ich rate mal ins Blauearchsectionview.png
Die unvollständige Ausgabe (1) weist darauf hin, dass wegen eines Kreis oder einer Ellipse etwas bei der Erstellung des projection snip ("Projektionsausschnitt") nicht klappt.
Bauchgefühl: das kreissförmige Element (2) liegt zum Teil innerhalb des clipping und zum Teil ausserhalb. Eventuell ist der Start/Endpunkt des Kreises ausserhalb und die Berechnung geht schief.

Mit freundlichen
ich versuchs gleich...
Audioclaudio
Posts: 74
Joined: Sun May 31, 2020 3:57 pm

Re: Clip Funktion Arch section Plane

Post by Audioclaudio »

Bildschirmfoto_2022-03-13_10-41-01.png
Bildschirmfoto_2022-03-13_10-41-01.png (8.58 KiB) Viewed 1153 times
kann eigentlich nicht sein
jeno
Veteran
Posts: 1820
Joined: Sun Jun 29, 2014 10:41 am

Re: Clip Funktion Arch section Plane

Post by jeno »

Audioclaudio wrote: Sun Mar 13, 2022 9:42 am Bildschirmfoto_2022-03-13_10-41-01.png
kann eigentlich nicht sein
Irgendwas noch oberhalb? Man kann die Projektionsrichtung nicht erkennen...
Eventuell hilft es die Richtung umzudrehen (nach "unten" anstatt nach "oben")
Was ist denn der komplette Wortlaut der Meldung im Ausgabefenster?

Mit freundlichen
Audioclaudio
Posts: 74
Joined: Sun May 31, 2020 3:57 pm

Re: Clip Funktion Arch section Plane

Post by Audioclaudio »

Also...
ich habe in der SectionPlane nur das 2DView der Ebene und die in Draft erzeugten Hatches
Bildschirmfoto_2022-03-13_11-02-24.png
Bildschirmfoto_2022-03-13_11-02-24.png (40.77 KiB) Viewed 1117 times
Ausgabefenster gelöscht und die Archview in ein leeres Blatt eingefügt. Clip steht dabei auf true...
ergibt:
Bildschirmfoto_2022-03-13_11-02-24.png
Bildschirmfoto_2022-03-13_11-02-24.png (40.77 KiB) Viewed 1117 times
mit Ausgabe:
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Circle or ellipse: cannot split the projection snip obtained by 'projectToSVG', continue manually.
Attachments
Bildschirmfoto_2022-03-13_11-08-37.png
Bildschirmfoto_2022-03-13_11-08-37.png (30.31 KiB) Viewed 1117 times
Post Reply